Precautions for the use of filling and sealing machine

1. Before using this machine, please clean the environment. No dangerous goods and other debris. Filling and sealing machine

2. Please do not install or correct parts that are not suitable for the function of the machine, or accidents may occur.

3. The operator's work clothes should be as light as possible. Special attention: the sleeves of the work clothes must be tied tightly and must not be opened.

4. After adjusting each part, turn on the main key switch and then slowly rotate the machine to see if the equipment is working properly and if there is any vibration or abnormality.

5. The main drive system of the machine is located at the bottom of the machine and is closed by a locking stainless steel door. When adjusting the load capacity, it is necessary to be opened and adjusted by specially designated personnel. Before restarting the machine, please ensure that all doors are in good condition.

6. The machine is closed by a clear Plexiglas door above the desktop. No one is allowed to open the machine without authorization when the machine is normally started. Tube filling and sealing machine

7. In case of emergency, please press the red urgent stop button for timely troubleshooting. If restart is required, it is necessary to confirm that the problem has been completely solved. Reset the emergency stop button, then restart the main machine.

8. The machine should be operated by trained and qualified personnel. Do not allow others to operate the machine at will, as this may cause personal injury and damage to the machine.

9. Before each refill, it is necessary to conduct a 1-2 minutes idle test to check the rotation of all parts of the machine. The operation is stable and there is no abnormal noise. The regulating device works normally and all instruments and meters work firmly. Tail sealing machine