Red wine labeling easy to appear in the problem and the solution

Red wine labeling easy to appear in the problem and the solution

Red wine labeling machine in the use of both stand-alone machine can be used at the same time can be used together with other equipment, while the realization of a multi-use machine, a simple adjustment of the machinery can be completed with different products labeling such as a machine can achieve Bordeaux bottle labeling, big belly bottle labeling, Remy Martin labeling, cylindrical red wine bottle double label labeling. In the functional characteristics of the basic realization of high-speed, efficient and intelligent control.

The use of wine labeling machine is inevitably some failures, the following are some common labeling problems and solutions.

A, continuous labeling problems.

This situation may be related to the sensitivity of the electric eye detection, adjust the electric eye to make it work properly. The problem still can not be solved may be the label beyond the applicable range of the selected electric eye, or electric eye damage, you need to consult the manufacturer. Another reason for the label away from the bias, the electric eye did not detect the label, before and after adjusting the electric eye to detect the position can be.

Second, the label is attached to the active axis.

May be due to the glue is too thin, in the label after the active axis, the glue out to the active axis. Or too much glue, adjust the interval between the scraping block and the glue coating wheel.

Third, the wine labeling machine does not feed paper smoothly.

The reason may be, limit the paper level adjustment is too tight, re-adjust the limit block; paper jaws have adhesion, cleaning the paper jaws; splitting paper too many sheets, adjust the gap between the splitting wheel and the paper splitting platform.